I finally finished the Brown Green wool kirtle. I had left off the last posts talking about sleeves and eyelets but once I got into the swing of things I got them done without taking any photos.

Bad me.

I was to the point of hemming the skirts, so I marked the hem and then carefully trimmed it even and overlocked the edge to keep it from fraying.

Then I put the kirtle on… and I hated it.

The bodice point came down far too long and didn’t curve in enough along the waist before hand. I looked for lack of better words, stumpy. I was not happy, I was so not happy I set the whole project aside for a month. I knew how to fix it, but taking apart an almost finished project goes against my grain. What if I messed it up?

After it sat for a month in time out, I got annoyed one night and decided that was it. I was going to fix it and if I messed up well then I’d have a brown/green petticoat. So I unpicked the front of the skirt and trimmed down the bodice point by two inches.
That fixed it, even if it turned my nerves into noodles.

Then it was just binding the hem and it was done.

I have finished the sleeves for the brown turns out it is actually green wool kirtle. All they need is lacing rings or pins to keep them on and then I’ll be able to take some photos. I used version 34873434 of my basic sleeve pattern that I’ve tweaked and adapted over the years. They are a bit loose to make sure I can bend my elbow when I have my smock on. Cause flexibility is a wonderful thing!

I might have just enough wool left over to make a doublet, but I won’t know for sure until I find my doublet block, which has once again disappeared from all existence. I have no idea if I still have the muslin mock ups I used for that pattern. So some Spring, er Fall cleaning in due for the tiny corner that serves as my sewing space. I’ll take photos of the space if I ever get it clean enough to photograph. Thread bits and dust and bottle of glue and scissors can really take up some space when they want to.

When I last posted about this project the skirts were done save for the hem.

So it is time to move on to the bodice!

When I cut the bodice out I had no lining or interlining with me, it was all at home. Then once I got home my sewing plans were put on hold due to an accident with a bench grinder and my thumb.

It was a small hurt but it put a stop to any hand sewing, and made the project take a bit longer then it should have.

For the bodice used my mock-up pattern for the Pisa gown, which in turn was based off my block pattern that I use for almost everything. I had high hopes for it, and decided while I could not hand sew I would indulge in some machine sewing where it would never show.

I cut out a layer of heavy twill for interlining and a layer of muslin and then zig zag stitched the two together, in period this layer might have been pad stitched. But the machine zig-zag does the job pretty well.

I then set the project aside.

Once my thumb had healed I set about re-ironing the pieces and then basted the muslin to the wool. I then turned the wool edges over and stitched them down to the interlining with the whip stitch. This goes pretty fast as you don’t have to use tiny fine stitches. After all what if you have to unpick something to fix it?

Then I cut out some fine black linen I had been saving and slip stitched it in by hand with silk thread.
I went all around the top, the straps and the side edges. I left the bottom of the bodice open because I had yet to attach the skirts and wasn’t sure how I was going to go about it. Since I was not lining the skirts I didn’t want to do the usual fold the edge over or face it and whip stitch into place. It seemed like that would give me unnecessary bulk that would show through.

So instead I carefully hand basted the skirt in place just to the wool and interlining, cutting the V for where the bodice met the top, which in retrospect might not have been needed. I then back-stitch the skirt to the bodice by hand along the edge. There is a note in Patterns of Fashion where Janet Arnold speculates the skirt of Elenora di Toledo’s gown might have had the skirt top stitched to it. I did the same to the back of the skirt after knife pleating it.

I sewed the linen lining down next and then started on the eyelets.

Where we last left off I decided to make a test draft of the Alcega pattern in newspaper, it won’t show me the drape of the fabric. But it will give me a better idea on layout, as my fabric is not as wide as the rash cloth.

Painter’s tape is useful for many things.

I then set about to tracing around the pattern and adding seam allowances. When I reached a point where the pattern over hung the fabric I folded it back and cut along the fold so I would have the perfect sized gore.

For the bodice pattern I had a mock-up with me that was similar. So traced along that, adding an inch to the top of the center front to give it the slightly arched neckline. I did the same for the back and then carefully cut out my wool.

I knew I was not going to line the skirt of the kirtle, But I also did not want machine zig zag stitching or a serged edge to show, and I was without my sewing machine. So I decided it would be a good time to try Laura Mellin’s technique for an Elizabethan seam.

My seam allowances were 1″ so I carefully folded each edge in 1/2″ and pinned it down to the ironing board and pressed. Then once it was cool I folded it over again and once more pressed. This gave me a guide to follow that was reasonably even. If I use this method again I think I will make a folding jig to help speed things up.

In most 16th century clothing linen thread was used for basic sewing, however I did not have any with me. So I used black Gutterman silk thread which I waxed with bee’s wax for extra strength. In the course of 2 days* I sewed the skirt together, pressing the seam allowances down as I went. The sewing method was enjoyable, and gave me a sturdy seam that did not affect the drape of the skirt.

With the skirt finished, save for the hem I was ready to start on the bodice.

*I do not recommend this, I had lots of time on my hands and really wanted to sew. But there is such a thing as too much sewing when your fingertips really start to hurt. Lesson learned…at least for now.